Showing posts with label stretch wrap. Show all posts
Showing posts with label stretch wrap. Show all posts

Wednesday, May 11, 2016

What Gauge Stretch Wrap Do I Need?

The gauge of the stretch wrap refers to its thickness.  For example, 100ga = 0.001in, so a lower number means thinner film and a larger number means thicker film.  Some users measure their film in microns.  For easy conversion, 25mic = 100ga (though the actual conversion is 25.4mic = 100ga).  The only difference between gauge and microns is how one chooses to measure the thickness of the film.

There are three factors that need to be considered when asking what gauge stretch film you need:
  1. What function is the stretch wrap serving?
  2. What is the average unit weight?
  3. What is the typical load configuration?
Stretch Wrap Function
There are two primary functions for stretch wrap - to hold things together, and to protect them.  There are some less common functions, such as in the moving industry where it's used to keep drawers and doors from opening on armoires, cabinets, dressers, etc.  An armoire

Average Unit Weight
In short,

Typical Load Configuration
There are three typical load configurations that need to be determined:
  • A-Load
    Symmetric, even, cubed loads with no sharp corners or protrusions and clean vertical sides
  • B-Load
    Less symmetric, of uneven nature, irregular vertical sides, slight puncture potential
  • C-Load
    Of no symmetry, very uneven, high puncture potential, multiple corners and edges
For more information on stretch wrap film please visit: www.stretchwrapsupply.com

Wednesday, April 9, 2014

UV Protection for Pallets and Product

For businesses who store their product outdoors, it is important to make sure your product is protected from the harmful rays of the sun.  UV rays can harm your product and can deteriorate the effectiveness of the stretch wrap or poly bags surrounding your product as well.  The further south you go, the more important UV protection is, but keep in mind that it's not the heat that does the damage, it's the unseen and unfelt UV rays, that are just as harmful in the winters of Minnesota as they are in the summers of Florida.

UVI and UVA
There are two terms to know when looking at UV protection:
  • UVI - Ultra Violet Inhibitor
    This is an additive that is used in the production of stretch wrap or other polyethylene plastics, which delays the oxidation (or deterioration) of film stored outside and not sheltered from the sun.  Without a UVI additive in the film, your stretch wrap will markedly deteriorate over time, lose its stretch and cling, and subsequently lose its effectiveness.  UVI protection is rated to be effective for a certain period of time, ranging from 30 days to a year or more, depending upon the application.  In short, UVI slows down the eventual oxidization of a polyethylene product and subsequently extends the life of the product.
  • UVA - Ultra Violet Absorber
    Probably the best common example of a UVA would be the sunscreen you use.   It absorbs the harmful UV rays and keeps them from impacting the poly product or its contents.  A UVA additive to the film will have much the same impact as a UVI, but also serves to prevent colors from fading over time.
  • Practical Difference between UVI and UVA
    To extend the life and performance of your poly product, UVI is all you need and is the most common additive for plastic products.  As a result, the remainder of this article will deal only with UVI.  Neither UVI or UVA should be used in contact with agricultural chemicals or pesticides.
UVI/UVA and Color
A common misconception with UVI treated products is that they need to be black.  This is not the case.  Most UVI treated products are, however, black or white or some other color.  Color has no impact on the UVI performance but is usually done for purely aesthetic or security reasons, or simply to differentiate it from standard non-UVI wrap.  Black UVI treated stretch wrap, for example, will prevent people from seeing what is on your pallet.  While color alone can affect the heat that is transferred to your product, it has zero impact on the UVI performance, which is where the real damage can occur.  A stretch wrap treated with a UVI additive is just as effective whether the stretch wrap is black, white, or clear.

UVI Treated Products
As a blog geared toward the industrial setting, we will focus on two primary product types that can be treated with UVI.
  • Stretch Wrap
    UVI stretch wrap film is rated for as short as 30 days, and can be longer depending upon environmental variables.  It is often black or white but can be clear and be just as effective as a UVI film.  If almost everything you wrap is stored outside, then UVI treated stretch wrap is a good option. 
  • Pallet Covers and Poly Bags
    Pallet covers and poly bags can be UVI/UVA treated and are rated in effectiveness for between 1 year and 3 years.  It should not be used in contact with agricultural chemicals or pesticides.  While it is common to find black UVI/UVA bags in stock as pallet covers, you can have any type bag in almost any size or thickness custom made with UVI/UVA additives.  If you have some products that need UVI protection and some that do no, UVI/UVA treated pallet covers can be a good option.  They will allow you to use your regular stretch wrap, but cover it with a UVI/UVA pallet cover.  They can also be re-used, provided you keep an eye on the cumulative sun exposure the bag is subjected to.  There are many stock UVI/UVA treated pallet covers (in 2mil black and 3mil black) and custom bags can be made in any size.  Samples are also available (standard bags, not UVI rated) so you can make sure you have the correct size.  When determining what size bags you need, use the formula below:

Contact us today for quotes on UVI treated stretch wrap (in any size), pallet covers, and poly bags.  We'll be happy to help you determine what will work best for your needs.

Thursday, March 13, 2014

Supplies for Moving Companies

If you're a moving company, whether large or small, you need the right materials to be competitive and offer your clients the most safe, secure move possible.  Most of that revolves around having the right materials to safeguard your client's belongings.  Following are some of the supplies that moving companies most often use, or could use.

Stretch Wrap
Stretch wrap is a stretchy, clear plastic film that can be used for a variety of applications within the moving industry.  There are two types of stretch wrap that are most common:
  • Hand Stretch Wrap - 12", 15" or 18" wide on a standard 3" core, and 20" and 30" on a 1" extended core
  • Bundling Stretch Wrap - 2", 3" and 5" widths.  The 2" and 3" films are on a 3" core and the 5" can ship on a 3" core or a 1" extended core.
Typical applications for stretch wrap in the moving industry:
  • Protecting furniture from nicks and dings (typically hand wrap)
  • Keeping furniture doors and drawers closed (typically bundling film)
  • Consolidating items so multiple items can be loaded/transported as one
Stretch wrap is easy to use, will not mar furniture - whether wood, leather or fabric, leaves no adhesive residue like tape can, is clear, and has strong, reliable hold potential to stand up in the many demands that the moving industry places on the items in its care.

Plastic Poly Bags
Plastic poly bags and related products can be used for a variety of purposes and can often be re-used as well (unlike stretch wrap).  Some of the most common poly products used are:

  • Furniture Bags - these come in sizes specific for chairs, loveseats, and couches.  Where standard poly bags open on the width, furniture bags will often open on the length, so instead of having to pull a poly bag over the couch from one end to the other and to lift it off the ground to do so, you can simply pull the bag over the top of the couch, allowing both ends to be protected and for it to be relatively easily lifted and moved while covered.
  • Garment Bags - these are designed for hanging clothes and are much like what you would get at a dry-cleaners.  These will ensure that your client's hanging clothes are protected as much as possible during the move, even if they are in a garment box.
  • Mattress Bags - these are sized for standard and pillow-top mattresses in all the common sizes - twin, full, queen, x-queen, king, and x-king.  These will protect your client's mattresses and/or box springs in transit and, depending upon the thickness you choose, can provide a handhold when carrying.
  • Reclosable Bags - these are zip-top bags that come in a wide variety of sizes.  The most common use of these is to store parts for when items have to be disassembled for transport.  Some reclosable bags also come with a white write-on block so they can be easily labelled and read.  These can be put in drawers or cabinets during transport, taped underneath the furniture, or simply carried separately.
  • Poly Sheeting - this comes in a wide variety of sizes and are simply long sheets of poly on a roll.  They range in width from 3' up to 20' and typically come in lengths of 100'.  For items too large to bag or to protect floors, for example, poly sheeting can be a useful option.  It can also be used to protect items that need to be set aside in a lawn, for example, or to cover them in the event of inclement weather during the move.
  • Poly Tubing - stocked in various thicknesses, it comes in sizes as narrow as 1" and as wide as 60", and in lengths from 300' to 4000', depending upon the width and the thickness of the tubing.  This product is used most frequently for protecting rugs/carpeting that are rolled up for transport, but can be used for many other applications as well.  Since it is a tube, it can be cut to length and taped or tied at each end to protect the item.
Carton Seal Tape
Tape is something every moving company needs.  But there is more to tape than just how wide or how long it is.  For a standard move, the type of tape (acrylic, hot melt, natural rubber) is generally not as important as is the thickness/grade of the tape.  The heavier and larger your boxes are, the thicker your tape should be.  The chart below helps illustrate the differences:


And just to be thorough, the following chart details the differences in the different types of carton seal of tape available:


For most moving applications, hot melt tape will be quite sufficient and it is also the most cost effective of the three carton sealing options.  For extreme cold weather moves or for items going in to long term storage, acrylic tape is recommended.  The most likely moving application for natural rubber tape would be if you're using recycled cardboard boxes, in which case natural rubber would provide the most reliable seal.

Thursday, November 21, 2013

How to Select Stretch Wrap - Frequently Asked Questions

What is the difference between stretch wrap and shrink wrap? 
  • Shrink wrap is a poly plastic product that is applied with the use of a heat gun that heat shrinks the film so that it conforms securely around the product to which it is applied.  It's most common application is for storage and protection from the elements.  In short, shrink wrap is used to cover and protect product.
  • Stretch wrap is a poly plastic product that is used most commonly to wrap pallets of boxes or other product.  It is stretchy with a strong elastic property and usually has a two-sided cling to is sticks to itself.  It does not need a heat gun or any other special equipment to be successfully applied.  In short, stretch wrap is used to contain product and hold them together.
 What is “gauge” and how do I know what gauge I need?
  • Gauge is the most common measure of the thickness of stretch film (sometimes also measured in microns)
    100 gauge = 25.4 microns = .0254mm = .001in
  • The higher the number, the thicker the film (100ga > 80ga > 60ga, etc)
  • 80 gauge is the most common film, the “average” or “standard”
  • Heavier gauge films are typically required for:
    • Heavy loads, such as fasteners, machine parts, bags of mortar or mulch, etc.
    • Uneven loads with more corners and angles (also known as B- or C-loads)
    • Greater puncture potential
  • Lighter gauge films are typically required for:
    • Lighter loads, such as foam products, or light food products (snack foods like chips, etc)
    • Even, square loads (also known as A-loads)
    • Little to no puncture potential
  • Film is typically available in gauges ranging from 40ga - 150ga
  • Ultimately, the thickness needed is subjective.  Samples film, when available, is ideal to determine what works best for your needs.

What is the difference between bundling film, hand wrap and machine film?
  • Bundling film has a smaller width (2”, 3” or 5”) and is hand applied
    •   
    • Applications
      • Securing long lengths of product, such as extruded metal, wood molding, PVC lengths, pipe, rebar, etc
      • Bundling together multiple small boxes so they ship as a single unit
    • Advantages
      • Small width
      • Similar application as tape but with no sticky residue
      • Easy to apply and clean to remove
    • Means of Application
      • Standard Bundler – the most common bundling film, it comes on a 3” core and often ships with one plastic plug-in handle per case
      • Extended Core– Comes on a 1” core which extends almost 5” beyond the film, creating a built-in handle for each roll.  Some ship with a rubber grip to fit over the extended core.
      • QuikWrap – The most efficient and most ergonomic option, ships on a 1¾” core and with one black plug-in handle per case.  The handle end features a black rubber grip that rotates freely around a core, allowing for easy application and a secure fit into the core of the stretch wrap.
  • Hand Wrap comes in 12”, 15”, 18”, 20” and 30” widths and is hand applied
    • Applications
      • Wrapping small pallets of average weight and evenly stacked product
      • Large pallet wrapping, but not in large quantities per day
    • Advantages
      • Can wrap a full pallet without the large capital investment required by a stretch wrap machine
      • Portable and can be used anywhere
    • Means of Application
      • Standard Hand Wrap – ships on a 3” core and is applied by hand or with hand dispenser such as the Nelson Better Wrapper  (12”, 15” and 18” widths)
      • Extended Core Hand Wrap – ships on a 1” extended core (looks like a rolling pin) and is applied by hand (20” and 30” widths)
  • Machine Stretch Film or Pallet Wrap most frequently comes in 20” or 30” widths, but is also available in 40”, 50” and 60” widths
    • Applications
      • Standard size skids but of heavy-weight product which require a high degree of stretch
      • Environments that require multiple skids to be wrapped per hour throughout the day
      • Semi-automated environments
    • Advantages
      • Machine wrap can obtain a stretch of over 250%, depending upon the film and the machine
      • Saves time
      • Greater efficiency and safety
      • Saves money on stretch wrap by getting more stretch out of each roll
    • Means of Application
      • Semi-AutomaticStretch Wrap Machines range in price from $3900 and upward and offer a variety of options to best fit your production and budget needs
      • Stretch Wrap Machines are generally not mobile and are restricted to a specific location within your warehouse
What is the difference between cast and blown film?
  • Cast Film
    • By far, the most commonly used film, particularly with stretch wrap machines and bundling film
    • Easy, quiet release
    • High Clarity
    • Tear resistant
    • Limited puncture resistance
    • Best for even loads of average, near-average, or below average weight
  • Blown Film
    • Most often used with hand wraps
    • Noisy unwind
    • Hazy, low clarity
    • High puncture resistance and toughness
    • Best used for heavy, uneven loads, or those with high puncture potential
What other options are available with stretch film?
The most common non-stock options are:
  • UVI – for long term outdoor storage
  • One-Side Cling – Good for loads that deliver on flatbed trucks (such as mulch) so that the skids of product do not stick together and risk being torn
  • Color – Stretch film can be made in various primary colors, both in tint and opaque
What is “gauge equivalent” or “replacement gauge” film?
  • Up until a decade or two ago, the only real measure for stretch film was its gauge, or thickness.  As a result, certain gauges became associated with certain strengths and performance characteristics
  • More recently, with the advances in technology, we are able to make thinner films that have the equivalent strength of thicker (higher gauge) films.  This enables us to provide you with a high quality film at a lower price because less material is used in the production of the film.  Our Extreme films are an example of this type of film.
  • Gauge equivalent or replacement gauge films are best suited for even loads of average or below average weight.
  • Despite the advances in production technology, the most common way of referring to film strength and performance is still the gauge.  80ga, however, now, may not necessarily refer to the actual thickness of the film, but to the relative performance – it will perform comparably to an actual 80ga film.


Wednesday, October 23, 2013

How Do I Choose a Stretch Wrap Machine?

How do I know if I need a stretch wrap machine?
There are two ways to apply stretch wrap - by hand and with a machine.  While there are many variables to consider when determining if you need a stretch wrap machine, here are the primary considerations:
Highlight Predator XS
  • How many pallets per day (or per hour) do we typically wrap?
    If you wrap more than four loads per hour, or over 30 per day, then a stretch wrap machine would be a good investment.  A stretch wrap machine can be cost-effective even if you wrap as few as 10-15 loads per day.  The more loads you wrap per day, or per hour, the more sense it makes to invest in a stretch wrap machine.
  • How much prestretch is required to effectively secure your load?
    The average person using hand wrap can attain a consistent prestretch of maybe ten percent.  Stretch wrap can attain a prestretch of over 250 percent, depending upon the type of film and the machine being used.  The higher the amount of prestretch, the more the film is stretched, the more tightly the load is secured, and the more loads you can wrap with one roll of film.
  • How much time is being spent wrapping by hand?
    This is a subjective variable, but a stretch wrap machine can literally enable your worker to press a button and let the machine finish the job while they tend to other tasks.
  • Safety
    By eliminating the need to hand wrap, a stretch wrap machine can dramatically increase employee safety.  There is no need to walk multiple times around a load, most of that time being spent bent at the waist holding a roll of stretch wrap.  One stretch wrap machine can certainly be more cost effective than one worker's comp claim - both in terms of time and money.
How much does a stretch wrap machine cost?
If your business manufactures or fabricates products you might have purchased equipment in the past such as an hoist, or a workstation jib crane so you might be familiar with the process of procuring capital equipment. If you've only and always used hand wrap, the cost of a stretch wrap machine (usually starting at around $6,000) can be intimidating.  But the purchase of a stretch wrap machine can be most accurately be looked at as an investment, rather than simply an expense.  A stretch wrap machine can offer you significant savings in the following ways:
Highlight Predator SS
  • Film Savings
    As mentioned above, the average worker using hand wrap can typically achieve no more than 10% prestretch.  A stretch wrap machine, however, can achieve over 250% prestretch, depending upon the film and the machine.  Prestretch simply refers to how much the film is stretched.  The greater the film is stretched, the less film you are using, and the more loads you can wrap with one roll of film. (see table below)
  • Time Savings
    Depending upon the size of the load, it can take one employee as much as three or more minutes to wrap one load.  If they're wrapping 20 loads per day, for example, that's 60 minutes - or one hour - spent wrapping.  With a semi-automatic stretch wrap machine, that time can be spent doing other things rather than walking in circles around a pallet.
  • Safety
    As noted above, the cost of one stretch wrap machine can be significantly less than the monetary and time expense of one worker's comp claim filed due to back or other injuries sustained by using hand wrap.
The chart below illustrates the potential savings of using a stretch wrap machine versus standard hand wrap.  The comparison is made using true 80ga film. 



As you can see, for a machine that lists at $5995, you can pay off your investment in anywhere between 6 months and 4 years, depending upon your volume.  With a higher grade machine, listing at $8995, it can be paid off in as soon as 8 months.  And with either scenario, you're using far less film and therefore spending less money -  you can wrap almost 70 pallets with one roll on a stretch wrap machine while only 9 with one roll of hand wrap (or 36 with a 4-roll case) due to the ability of the machine to achieve far greater and consistent stretch from the film.

Another way of looking at it is that with one pallet of 80ga 20" machine film (40 rolls) you can wrap approx  2750 loads (assuming 150% stretch).  With one pallet of 80ga 18" hand wrap (192 rolls, or 48 cases) you could wrap only 1690 loads.  No matter how you look at it, using a stretch wrap machine will save you money and time in the long run.

If the cost is still a problem for your budget, consider using the Section 179 tax deduction when you file your taxes.  This can help cut your end cost by close to forty percent.

How Do I Select a Stretch Wrap Machine?
You will need to know the following information in order to determine what stretch wrap machine will work best for your packaging needs:
Highlight Freedom 6500
Rotary Arm Wrapper
  • Minimum, average, and maximum load weights
  • Maximum load height
  • Maximum load width/depth 
  • The average number of loads per day, or per hour, you typically wrap
  • The nature of the product(s) being wrapped
  • The width film do you intend to use
  • If you will be loading the machine with a forklift only or a pallet jack as well
  • If you need an integrated scale
  • The color stretch wrap you use (this can affect the photo-sensor eye)





 

Friday, October 18, 2013

Printed Stretch Film and Alternatives

Generally, there are four reasons why a company may be interested in printed stretch film (or stretch wrap):
  • To minimize the possibility of pallets being broken in transit
  • Security/Theft deterrence
  • Warehouse/Internal identification
  • Brand exposure
Essentially, printed stretch film is the same as regular stretch film, but with your logo or the text of your choice printed on the roll.  In light of the reasons noted above, it can be a very useful option.  It can also present its own potential negatives:
  • Neck-down - distortion of the logo/text caused when the film is stretched
  • Overlap rendering the logo/text illegible or unidentifiable
  • Direction - with a logo, or more particularly with text, the wrap must be applied in a certain direction or it goes on backwards, rendering it illegible
  • Cost - printed stretch wrap can be 2-3 times more expensive than standard stretch wrap
  • Waste - once stretch wrap is used, it cannot be reused
  • Redundancy of effort - often, the printed stretch wrap is not the primary wrap and is applied in only one or two layers after the primary wrap has been applied.
Additionally, if printed stretch wrap is not applied correctly, it may actually do your company more harm than good.

There are, however, alternatives to printed stretch wrap that can still meet all or most of the above specified advantages to printed stretch wrap:

Colored Stretch Wrap
This is one of the most cost-effective alternatives.  Any printed material will require a custom-run of that product and will also entail artwork and plate charges.  Many stretch wrap distributors stock colored stretch wrap, whether it be in the form of bundling film (2" - 6"), hand wrap (10" - 30") or machine wrap (20"+).  Colored stretch wrap can offer security by obscuring the view of the contents of the pallet; can provide internal identification so that personnel know, for example, which skids are returns and which are new; and can minimize the possibility of pallets being broken down because most freight carriers do not use colored film.  If you ship with orange film and your customer receives the pallet wrapped in something other than orange, you will know that the load has been tampered with and you can deal with that accordingly with your customer and freight carrier.  Like any stretch wrap, colored stretch wrap cannot be reused.  While more expensive than standard stretch wrap, colored stretch wrap is still less expensive than printed stretch wrap and is typically available in smaller minimum quantities and can be used as a simple over-wrap rather than as a primary wrap, or can be used as the primary wrap as well.

Colored stretch wrap can also be combined with custom printed labels in order to get your brand name on the pallet and generate awareness of your company.  This combination can achieve all of the goals related to using printed stretch wrap and is much more flexible and cost-effective.

Printed Pallet Covers
This is one of the more cost-effective options that will accomplish brand exposure along with security and identification.  One advantage printed pallet covers offer that is unique is that there is the possibility they may be re-used, particularly if utilized internally.  They may be used under clear stretch wrap or over any wrapped load.  The print will not be susceptible to distortion (or neck-down) or overlap as would printed stretch wrap.  Printed pallet covers are available in a variety of sizes, colors and in different mil thicknesses, depending upon your needs.  A guide to know how to measure for a pallet cover can be found here.

Colored pallet covers, printed or unprinted, may also help you accomplish your goals.  As opposed to colored stretch wrap, which is very thin and requires several overlapping wraps to achieve any significant degree of opacity (solid color, lacking transparency), colored pallet covers are already thick enough to provide the level of opacity needed for security and/or identification purposes. Samples of stock pallet covers are available at no charge to help you most accurately determine what size and thickness work best for your needs before you make any special printed and/or colored order.

Printed Tape
Printed tape is another cost-effective alternative to printed stretch wrap.  An advantage to this option is that there are stock prints available for security purposes or to discourage the load from being broken down in transit.  Custom printing is available as well.  Printed tape can also be used for other applications - such as on boxes, drums, or any other container or packaging option.  Printed tape can provide brand exposure, internal identification, and can discourage your pallets from being broken.

Given the relatively high cost and other limitations of printed stretch wrap, it is not a viable option for most users, though it may look attractive in concept.

Tuesday, October 8, 2013

Stretch Wrap Dispensers and Wrapping Safety

Stretch wrap is thin poly plastic used to contain a load on a pallet and keep it from shifting and being damaged in transit.  It comes in three basic forms - bundling film (less than 10" wide), hand wrap (10" to 30" wide) and machine film (20" wide and up).  This post will focus on how to safely and efficiently use hand wrap.

3" Core Hand Wrap w/no Dispenser
Hazards of Using Hand Wrap
The average pallet is 40" x 48" and can range in height anywhere from a 24" up to 72" or more.  The general rule for wrapping an average pallet is at least three wraps around the bottom, three around the top, and two around the middle.  This means a lot of walking and bending at the waist to wrap one pallet.

Last, many users of hand wrap walk backwards when applying the wrap to their product.  This means that your employees are bending at the waist, reaching over their shoulders, and walking backwards many times during the day.  Not only is this inefficient - it is hazardous.

The Cost of Back Injuries
According to the Bureau of Labor and Statistics, back injuries account for over 20% of all workplace injuries.  Back injuries account for more than one-third of every worker's compensation dollars.  The US Department of Labor says that back injuries account for more than 187 million lost work days per year.  OSHA's manual on back disorders and injuries cites the following activities as contributing to the problem:
Extended Core Hand Wrap
  • Reaching while lifting
  • Poor posture
  • Repetitive lifting
  • Twisting while lifting
  • Bending while lifting
  • Maintaining bent postures
  • Fatigue
All of these can be found in the typical hand wrap application of stretch wrap.

Stretch Wrap Dispensers and Options
If your demand is not sufficient to warrant a stretch wrap machine, there are options that can make the hand wrapping process much safer and efficient.

Pole Dispensers
These are perhaps the best, most efficient and most ergonomic option available for hand wrap applications, but are also the more expensive.  Pole dispensers range from approx 48" to 60" long and most can accommodate film ranging from 10" wide up to 20".  They typically also have an integrated hand brake that allows the user to apply more stretch as needed.  Pole dispensers allow the user to apply a tight wrap around both the top and bottom of a pallet, all without having to bend at the waist.  They also allow the user to wrap over the top of a product with ease.  And the pole dispenser can allow the user to achieve a tight, secure wrap without having to walk backwards around the pallet, bend at the waist (even for the bottom of the skid) or reach over their shoulder.  They cost between $120 and $160, so are among the more expensive options, but are also the most reliable, flexible and most popular choice of high volume hand wrap users such as distribution centers or logistics centers.

Here are some sample videos of one of the more popular pole dispensers that illustrate how they work, the flexibility they offer, and the improvement in efficiency and ergonomics they provide.  Follow these links for more information on the three leading pole dispensers - Nelson Wrap Dispenser (pictured above), Danahe WrapStik, and the Highlight Pole Wrapper.
 
Hand Wrap Dispensers
These are a more cost-effective option, but still require the user to bend at the waist and perhaps walk backwards.  Their main advantage is that they allow a greater ability to apply a tight stretch to the load as opposed to using no dispenser.  These range in price from approximately $70 to $120 each.

Hand Saver Dispensers
These are by far the least expensive option, but still require bending at the waist and awkward walking.  These dispensers inset in to each end of the 3" core of your hand wrap and allow you to use your fingers to hold the inner ring while the outer ring rotates with the film.  These run as low as $8 - $10 per pair.

Extended Core Hand Wrap
Most hand wrap comes with a 3" core that extends only slightly past the edges of the film.  Extended
core hand wrap comes on a 1" core that extends approximately 5" out each end of the film (like a scroll or a rolling pin), creating built-in handles.  Some extended core products ship with rubber grips that fit over the ends of the extended cores, allowing you to hold the grips while the core rotates inside.  But like the others, this still requires bending at the waist and awkward walking.  Extended core hand wrap film typically comes in 20" and 30" widths and typical maximum length of 1000' (as opposed to 1500' for most 3" core hand wrap).  These vary in cost based upon gauge, film type, and width.

Tuesday, September 17, 2013

Stretch Wrap and Firewood Bundling

Whether you bundle firewood for sale for for your own personal use, stretch wrap is the most preferred way to bundle your material.  Choosing the right wrap is very subjective and there are many options, but the information below should help you determine what will work best for you.
w/1 band of bundling wrap

w/2 bands of bundling wrap

with 12" hand wrap

What size stretch wrap do I need?
  • Bundling Film
    This is narrow width stretch wrap that comes in widths of 2" bundling stretch wrap , 3" bundling stretch wrap , and 5" bundling stretch wrap.  Bundling film is a good choice when you want to keep your firewood vented.  It allows you to wrap just the ends, or both ends and the middle, and reduce the possibility of moisture becoming trapped in the wrap.
    • Hand Wrap
      This is a wider wrap that comes in stock widths of 12", 15" and 18".  With the extra width, this can allow for a quicker wrap time and will fit many firewood bundling machines and devices.  All of our hand wrap comes on a standard 3" core.
     What gauge stretch wrap should I use?

    Ultimately, this is a very subjective question, but there are some guidelines that can be used.  The typical application for stretch film is holding together boxes of product on a skid weighing typically over 1000lbs, so the wrap has to be able to stretch tightly to hold the load together during the shipping and handling processes.  That is not the case with firewood bundling, where the bundles are small, typically moved by hand, and weigh only a few dozen pounds at most.

    For these reasons, we recommend our Hand Wrap.  This hand wrap is thinner and less expensive than a traditional 80-90ga film, but has comparable strength when it comes to holding your bundles together.  It has the cling you expect with a standard gauge stretch wrap and will resist the minimal puncture potential presented by firewood.

    What are the best tools to use to wrap the firewood?

    For bundling film we have three handle options:
    • Handy Bundler
      This is the most common type.  The film comes on a 3" core and each case has one plastic plug-in handle.  This is a good choice if you have one person doing the wrapping, and they do it sporadically.
    • Best Bundler/Extended Core
      Handy Bundler, Best Bundler and QuikWrap (left-to-right)
      This film comes on a 1" extended core and is available only in 5" widths.  The 5" of film is wound on a 10" long core, leaving a 5" long handle built-in to each roll.  Our Best Bundler 5" Bundling Stretch Wrap  ships with one red rubber grip per case, which you can use to slip over the core and reduce any wear on unprotected hands.  This is a good choice if you have multiple people doing the wrapping and the wrapping is done fairly often throughout the day.
    • QuikWrap
      For heavy use, applications, where more than one person is doing the wrapping and they are doing it for the majority of the day, our patented QuikWrap system is the perfect choice.  It is available in all widths (2", 3" and 5") and comes on a 1-3/4" core.  Each case comes with one QuikWrap handle.  The handle
      Eliminator
      Little Nelson
      plugs in to the core and has a built-in black, rubber grip that rotates around a fixed core, allowing you to use the wrap without the need to wear gloves or worry about the handle popping out of the core.  It also give you the ability to apply tension to the wrap by tightening your grip on the handle.
    With hand wrap, there are a couple of options.  One is our Highlight Hand Held Stretch Wrapper.  The Eliminator allows you to easily wrap bundles as large as 24" x 24" x 24" and up to 70lbs and it supports stretch wrap between 10-15" wide.

    Another option is the Little Nelson Bundling Film Dispenser, which works on 3" core bundling film between 2" and 6" wide.  It is a heavy-duty, ergonomic alternative to the plug-in handles that come with most bundling film.  It features a built-in braking mechanism which allows you greater control over how much stretch you want to apply and where.